Mopeka TD40 Ultrasonic Bluetooth Tank Level Sensor (Victron Compatible)
SKU: 66110676462

Mopeka TD40 Ultrasonic Bluetooth Tank Level Sensor (Victron Compatible)

$93.63 $104.03
Save 10%
No.2 Bestseller on scissortown.com >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 7 - Jul 12

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Mopeka TD40 Ultrasonic Bluetooth Tank Level Sensor (Victron Compatible)Mopeka TD40 Ultrasonic Bluetooth Tank Level Sensor: Precision Monitoring for Critical Liquid Assets Engineered Accuracy for Demanding Tank Level Applications The Mopeka TD40 Ultrasonic Tank Level Sensor delivers high resolution liquid measurement for professionals managing propane, LPG, water, and other stored liquids. Using advanced ultrasonic technology, this sensor reads levels down to 0. 25 mm (0. 01 inch), providing the data integrity needed for

Mopeka TD40 Ultrasonic Bluetooth Tank Level Sensor: Precision Monitoring for Critical Liquid Assets

Engineered Accuracy for Demanding Tank Level Applications

The Mopeka TD40 Ultrasonic Tank Level Sensor delivers high-resolution liquid measurement for professionals managing propane, LPG, water, and other stored liquids. Using advanced ultrasonic technology, this sensor reads levels down to 0.25 mm (0.01 inch), providing the data integrity needed for inventory control, safety compliance, and operational efficiency. Its long-range Bluetooth (BLE) connectivity integrates directly with the Tank Check or Co-Pilot app, transforming your smartphone or tablet into a centralised monitoring dashboard.

Unlike conventional float-based or capacitive sensors, the TD40 mounts externally to the tank bottom, eliminating contact with the liquid. This non-invasive design reduces corrosion risk, simplifies installation, and ensures consistent performance across a wide range of tank heights up to 4.88 metres (16 feet). Whether you are managing a single residential LPG tank or a fleet of commercial vessels, the TD40 provides reliable, repeatable measurements without the maintenance burden of traditional probes.

Key Technical Advantages

  • Sub-millimetre resolution: Measures liquid levels to 0.25 mm, enabling precise inventory tracking and leak detection.
  • Extended battery service: Powered by 2x AA Energizer Ultimate Lithium cells, delivering up to 5 years of operation for minimal field intervention.
  • Boosted Bluetooth range: Long-range BLE ensures stable data transmission through tank walls and across typical installation distances.
  • Multi-commodity support: Select propane, butane, water, or custom liquids directly in the app for automatic volume calculations.
  • Cloud-enabled data: AWS-powered backend allows remote monitoring, historical trending, and multi-user access via the Co-Pilot platform.
  • Victron integration ready: Seamlessly connects with Victron GX devices for unified energy system monitoring.

Installation and Integration

The TD40 requires a 50.8 mm (2-inch) threaded port or a 50.8 mm diameter hole cut into the tank top. This standardised footprint simplifies retrofitting into existing tank infrastructure. Once installed, the sensor pairs with the free Tank Check or Co-Pilot app, available for iOS and Android. The app provides real-time level readings, low-level alerts, and usage history, helping you avoid run-outs and optimise refill scheduling.

For off-grid and mobile applications, the TD40’s low power consumption and robust BLE link make it ideal for caravans, RVs, and marine vessels where reliable tank monitoring is critical but access is limited. The sensor’s solid-state design withstands vibration and temperature extremes, ensuring dependable operation in harsh environments.

Why Choose Ultrasonic Over Traditional Sensors?

Traditional mechanical float sensors are prone to sticking, corrosion, and inaccurate readings due to sludge or sediment. Capacitive probes require tank wall penetration and are sensitive to liquid dielectric changes. The Mopeka TD40’s ultrasonic pulse technology measures the time-of-flight from the sensor to the liquid surface, unaffected by liquid composition, temperature stratification, or tank material. This results in a maintenance-free solution that maintains accuracy over years of service, reducing total cost of ownership and operational risk.

Applications

  • Caravan and RV fresh water and LPG tanks
  • Marine fuel and water storage
  • Off-grid residential propane and water systems
  • Industrial chemical and process liquid inventory
  • Tiny home utility monitoring

Download the App:

For detailed installation instructions, please refer to: Mopeka TD40 Install Instructions

Take Control of Your Tank Monitoring

Equip your system with the Mopeka TD40 Ultrasonic Tank Level Sensor and gain the precision and reliability your operations demand. Order today to eliminate guesswork and ensure your critical liquids are always accounted for.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 66110676462

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.5 ★★★★★
Based on 1370 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
T
Verified Purchase
Terry Justice
Cuba, US
★★★★★ 5
Better than the green goo
Size: Full-size Truck, SUV (2-pack)
Recently, while I was at work, I noticed that I had at some point run over a nail with my car. Normally, you'd take your car to the tire shop and let them plug the hole for you. Well, the only problem was that the nail decided that it was going to poke my tire where the sidewall meets the tread, and most shops will refuse to plug a tire when it's punctured there. Makes sense, it's a liability issue for them, so I can't blame them. That still leaves me with the problem of having a tire with a nail in it. So, I could either replace the tire with either a new or used tire, which is expensive or I can try using a sealant to try and get as many miles out of my tire as I can. In the past, I had tried using the green goo sealant on nail holes, and while it works to get you 15 miles down the road, that's about it. Now, while TireJect doesn't recommend using their product on punctures on the shoulder of the tire, I decided that I'd give it a try to see if it would work. And as of writing this review, it's been about 10 days since I put TireJect in my tire, and so far, it hasn't leaked any air, despite it not being meant for the shoulder. When money isn't so tight, I'll probably go ahead and replace the tire, especially since there's only about 4/32 tread depth left, but for the time being, I'll keep running it, and hopefully it keeps holding pressure properly like it has been. Now, as for how easy it is to use, the only tools you will need that aren't provided, is an air compressor to allow you to re-inflate the tire. The kit comes with everything else you will need, including a valve core removal tool and a syringe to add the sealant to your tire. To use this product, you will first need to carefully remove the valve core with the provided tool, careful not to lose the core, since it doesn't come with a replacement core. After that, thread the hose on the syringe on to your valve stem, and then carefully add the required amount of sealant to the syringe. If you accidentally spill some, wipe it off before it dries, so that it doesn't stain anything. From there, just push the goo into the tire with the plunger, adding more to the syringe as necessary. When you're all done, re-install the valve core into the valve stem snuggly, careful not to over-tighten, and air up the tire to the recommended PSI with your compressor. After all that is done, go take a short, slow drive to distribute the sealant, and then recheck your air pressure.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 29, 2025
T
Verified Purchase
Tony Nowikowski
Lexington, US
★★★★★ 1
TPMS Compatability is a LIE
Size: Sedan, Crossover, Small Truck
2018 Subaru Impreza, with one tire with a slow leak (about 2 PSI a week) that I couldn't trace. I bought the "Full-Size Sedan, Small Truck, Crossover" kit (the 6 oz. pouch) based on my tire size, 225/40/18. After I removed the valve core, attached the dispensing hose and opened the cap, the product would not flow into the tire. I squeezed the pouch, but that only made the product leak out around the valve stem onto the wheel and driveway. I tried rotating the tire so the valve stem was at the top, and and also at the bottom. I even took the wheel off so I could get a fully vertical flow. Nothing worked. I finally gave up after only about half the product was dispensed, and I do think most of it went somewhere other than in the tire. I reinstalled the valve core, remounted the wheel, plugged in my little lighter socket-powered compresseor, and tried to inflate the tire. And ... NOTHING. The pressure reading on the compressor immediately shot up to over 100 PSI, and it automatically shut off. Tried multiple times, with the same result. I again removed the valve core, and a) no air came out of the tire when I removed it, and b) even with no valve core the compressor still would not pump air into the tire. Clearly the gunk had completely blocked the valve/TPMS. Fortunately, when I took the tire to Costco (where I'd bought it), they were able to fix the damage I'd done, as well as patching a small nail hole in the tread I hadn't seen (that was clearly the source of the slow leak) for no charge. Since I've already submitted a refund request, ultimately all it really cost me was my time and effort ... and a whole lot of stress.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 26, 2024
R
Verified Purchase
raspree56
Chelsea, US
★★★★★ 5
Forget the gooey stuff, this product WORKS! See UPDATES 1 and 2
Size: Compact Car, Mid-size Sedan
I've had a slow leak in one of my tires for some time. It's a common thing with chrome plated alloy wheels, they get corrosion on the bead area where the tire seals and then you get a slow leak. This was the only product which is water soluble so it's not going to make a permanent mess inside the tire; additionally, it contains tiny bits of Tufsyn which is the material some tires are made from. So it's not just a liquid that is sealing the leak, it's tiny bits of rubber. I was putting 5 or 6 lbs of air in my tire every few days, and I could see that the tire was getting low. I installed this TireJect per the instructions a week ago and the tire appears to be doing great, despite the fact that we've had some very cold weather. (I didn't want to check it with a gauge while it was this cold out because just in case the tire's valve didn't seal all the way; I'll check with a gauge when this cold snap is past.) While I can't say for 100% sure that there is no more leak, I suspect that the leak has been sealed up completely. This is a product unlike the others and I think it's worth the price. FIRST UPDATE: It has been two months and I haven't had to add any air at all to the tire where I used this product. There was a slow rim leak which was losing about a pound or so per day and it has been totally fixed. The car has sat for several days a few times, including in single digit cold weather, as well as driven regularly otherwise, and the tire hasn't lost any air. I think it's the micro Tufsyn fibers in this product which seal leaks better than some goopy glue stuff other brands are made of. I totally recommend this product! SECOND UPDATE - it's been eleven months since I added this to my tire with the slow rim leak and I have not had to add air a single time. Not once. THIS STUFF WORKS. Forget the slime and foam and get this.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 5, 2024
J
Verified Purchase
Jesse
San Leandro, US
★★★★★ 5
TireJECT cannot work miracles
Size: Compact Car, Mid-size Sedan, Size: Compact Car, Mid-size Sedan
TireJECT is a surprisingly thin fluid that supposedly contains fibers that must help stop up holes. Frankly I'm still confused as to how this stuff can plug a leak, but apparently it does. Tons of reviews say so. I say apparently because the product did not completely stop a slow leak in my tire, but that's OK. I knew it likely wouldn't. I'll have to replace the tire unfortunately. I had a garage install four nearly-new tires on my car. After installing, a heavy leak was discovered in one of them. They took the tire off again and found a small tear near the rim/bead of the sidewall. Since the tear would be flat against the rim, they suggested to let them try and repair it with tire patch adhesive and lots of bead sealer. They were confident, so I went for it. It seemed to work, but it went flat a few days later. TireJECT seemed like the perfect solution to the slow leak since I wouldn't have to disturb the repair. I bought the kind without the syringe and regretted it immediately upon trying to use it. First, the valve stem removal tool broke as it loosened it. I had to buy a new tool down the road. When I went to inject, I squeezed as hard as I could but it just wouldn't flow past the TPM. It also kept leaking out of the flex joint of the nozzle. I had a huge syringe on hand, so I sucked up the rest from the bag, ziptied the hose on both ends and got the rest of the product into the tire. HURRAY! The tire pressure had fallen considerably by the next morning. BOOOoo. I contacted TireJECT, and after several emails (and long waits in between). They determined their product was not suitable for my use case. They refunded what I paid without me even asking. I really appreciated that. That said, before injecting, the tire would go flat overnight. So, TireJECT does work to a good degree. I'm half tempted to overdose the tire with another package. Give TireJECT a try! Though, be sure your situation matches their criteria. If you have a TPM, opt for the package that comes with a syringe. You will need it. Also, throw the cast pot metal, tire stem tool out and get a decent machined one before you do the repair. Thank me later.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 1, 2025
D
Verified Purchase
D. T.
Omaha, US
★★★★★ 5
Works once again!
Size: Compact Car, Mid-size Sedan
Third time using TireJect on a vehicle, and it's worked perfectly each time. First was the off-road formula for leaking motorcycle tire beads.... then this formula my light SUV with a slow leak until I could get the tire replaced. This was for a stubborn tire that had a leak SOMEWHERE, and usually would lose 10-15 psi overnight after a fill-up. Two days later, still fully inflated and no signs of trouble. This is great because this formulation is also okay for tire pressure sensors. Will continue to purchase this product for similar issues going forward. High quality, durability, and easy to use.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 29, 2025

recommand products

Hutchins Manufacturing 5028H PAD 8",VA HOOK-27 HOLES
107.06
DeatschWerks Denso (Sumitomo) Top Feed Injector Clips - Case of 50 - conn-sumitomo-cs
157.50
Seibon 11-12 Scion tC 10mm Wider Fenders - FF1112SCNTC
675.00
Hutchins Manufacturing 5103 PAD 3",HOOK-3501,503, 603
37.99
xTune Dodge Ram 1500 94-01 / Ram 2500/3500 94-02 LED Tail Lights Black Smoke ALT-ON-DRAM94-LED-BSM - 5081155
111.78