Tycon Systems 5 Port Unmanaged Industrial GigE 802.3at PoE Network Switch [TP-SW5G-24]

Tycon Systems 5 Port Unmanaged Industrial GigE 802.3at PoE Network Switch [TP-SW5G-24]The TP SW5G 24 power over ethernet (PoE) 10 100 1000MB switch offered by Tycon Power Systems is a fully automatic high speed 5 port Ethernet switch with up to 35W of PoE power per port. It complies with the IEEE802. 3af at specifications for valid PoE device detection. The unit supplies power to the remote device on the unused Ethernet pins 4,5(V+) and 7,8(V ). The Ethernet spec supports distances up to 100m (328 feet) between the PoE switch and the

The TP-SW5G-24 power over ethernet (PoE) 10/100/1000MB switch offered by Tycon Power Systems is a fully automatic high speed 5 port Ethernet switch with up to 35W of PoE power per port. It complies with the IEEE802.3af/at specifications for valid PoE device detection. The unit supplies power to the remote device on the unused Ethernet pins 4,5(V+) and 7,8(V-). The Ethernet spec supports distances up to 100m (328 feet) between the PoE switch and the remote device. The switch accepts DC power from 12-36VDC which makes it an excellent choice for those systems powered by battery power. There are 2 power inputs for attachment of primary and backup power sources. It also accepts 802.3af or 802.3at power through port 5. Product Specifications • Ethernet standard: IEEE802.3/IEEE802.3u • Ports: 1 data/PoE input and 4 data/PoE, automatic crossover and polarity • Transmission speed: 1000Mbps/100Mbps/10Mbps auto-negotiation • Switch technology: store and forward • Protocol: CSMA/CD • Flow control: IEEE802.3x(full-duplex), back pressure(half-duplex) • Data transmission rate: 1488000pps for 1000baseT, 148800pps for 100baseT, 14880pps for 10baseT • Address Table: 1K MAC, self-learning • Connections: Shielded RJ45 • PoE Output Ports: Port 1-4, auto power management pin assignment: TX(1,2), RX(3,6), V+(4,5), V-(7,8) • Maximum PoE power: Up to 35W per port; max 70W per 5 port switch • PoE auto detection: IEEE 802.3af, 802.3at • PoE protection: Over temperature, over current, over/under voltage • Data surge protection: IEC61000-4-2 (ESD) ±15kV (air), ±8kV (contact), IEC61000-4-4 (EFT) 40A (5/50ns) , IEC61000-4-5 (lightning) 20A (8/20μs • DC power input: 24VDC (12V to 36V), dual DC inputs, reverse polarity protected. Also accepts PoE power input on port 5 This product does not include a power supply, you must purchase a separate power supply. Product Features • High power 10/100/1000MB PoE switch • Remotely power equipment through Cat5 cable up to 100m • Up to 2A per port • Built-in surge protection • Automatic MDI/MDI-X crossover • Automatic speed and duplex sensing • 1K self learning MAC address table • Compact size • High temperature operation • CE and FCC certification Product Applications: • Wireless access points and client devices • IP phone and security camera systems • Power multiple devices from 1 data cable Technical Data Sheet: TP-SW5G-24 Data Sheet TP-SW5G-24 User Manual